How To Maintain Your Home’s Furnace
Routine Maintenance Steps
If you have problems with your furnace in Scarsdale, NY, you are probably worried about needing a whole new heating system. A faulty furnace can cause a fire, however, and fire cleaning procedures can be even more expensive than the cost of a new furnace. The good news is that there are some routine maintenance steps you can perform at home to reduce the risk of your furnace malfunctioning.
1. Check the Burner Flames
Before you begin, turn off the electric power switch and remove the chamber door. Then turn the power back on and turn up the thermostat to activate the flames. Burner flames should be blue and even. If the flames are yellow, this indicates the burners are dirty.
2. Clean the Burners
Turn off the power again and then shut the gas off. Vacuum the burners and clean the base of the furnace as well. Check for soot and clean up any black powder to reduce the likelihood of needing a fire cleaning down the road. The blower door should also be removed to clean the blower compartment.
3. Remove and Clean the Blower
Remove the blower and carefully clean the blades with a small brush or handheld vacuum, making sure not to disturb the counterweights on the blades of the fan. A well-maintained fan also reduces the need for smoke cleaning in the event of a fire.
4. Change the Furnace Filter
The furnace filter should be changed every couple of months. Inexpensive fiberglass filters are usually sufficient in protecting both the blower motor and the blower. Consult your owner’s manual if you have questions about the type of filters recommended for your furnace.
Schedule an annual furnace maintenance checkup with a professional in addition to these DIY tips. It is also essential to call a fire restoration service if you ever experience a furnace fire.
Avoid the need for a fire cleaning by keeping your furnace well-maintained.